HANMATEK Stud Finder Wall Scanner Detector with Pro Smart Sensor,Audio Alarm and HD LCD Display,5 in 1 Upgrade Wood Exact Mode Stud Finder Tool for The Center Edge of Metal,Studs,AC Wire,Pipe
- 【Professional Stud Finder】: 5 scanning functions: Stud scan exact mode 0.8 inch(20mm), stud scan deep mode 1.5 inch(38mm), AC Wires scan 2 inch(50mm), Ferrous metals scan 4.7 inch(12cm) and Non-ferrous metals scan 4 inch(10cm). According to your needs, you can switch to the appropriate mode to help you find the edges and center of nails, screws, rebar, wooden beams, wires behind walls, floors, and ceilings.
- 【Easy To Read】: The signal strength display area on the display screen can clearly show the detection depth distance to the metal object. Scan mode, detection depth, detection signal strength, battery indicator and center point can all be seen on the screen.
- 【Fast And Accurate】:The stud finder can be calibrated automatically, just press the metal detection button. Note: Auto-calibration must be performed without nails, AC wires or metal, otherwise the test results will be inaccurate.
- 【Easy To Use】:HANMATEK stud finder with audible alarm (can be switched off) and 3 color indicator lights, green light indicates that no target is detected; orange light indicates that the edge of the target is detected; and the Red backlight indicates that the center of the stud is detected. Ergonomic design allows comfortable grip at any angle. The rubber on the back can prevent damage to the wall, safe and convenient.
- 【Wide Range Of Applications】: The wall stud finder quickly detects metal and wooden AC cables hidden in the walls, floors and ceilings of your home, helping you to avoid hazards when installing TVs, cabinets and more.
-
Save 10% when you buy two or more items.
-
Get 5% off your next purchase.
-
Enjoy free delivery on orders above $200.
-
Orders are processed and shipped from Canberra
3-6 days (Domestic)
Confidence-backed purchases with 30-day return support.
AUD |
BRSRMHANBACB4AL4 |
Category |
Measuring & Layout Tools , Scanners & Testers , Stud Finders |
Tags |
Estimated shipping
Select a product to estimate shipping.AC Scan Detection
Up to 50 mm/2in;
Multiple detection, the location will be more accurate;
Detection units can be switched for all modes (cm/in/mm).
Exact Mode (Wood)
Up to 20mm/0.8in;
long press to switch exact mode/deep mode.
Depth Mode (Wood)
Up to 38mm/1.5in;
Wood detection mode can detect objects in plaster drywall, plywood sheathing, bare wood flooring, coated wood walls.
Metal Scan Detection
Detects metal up to 120mm/4.7in;
Non-ferrous metals up to 100 mm / 3.94in;
Detection of metal will be displayed on the display with the detection operation synchronized with the detection depth value.
Easy to Use
Step 1: Calibration before scanning
Short press the detection mode button, and wait for automatic calibration;
You can choose the detection mode, and detection depth, the instrument defaults to metal mode.
Step 2: Scanning walls
Move the scanner slowly along the wall. Do not lift the instrument or apply additional pressure;
Note: If you shake or lift the instrument carelessly, you need to recalibrate it.
Step 3: Find the center of the target
The progress bar on the screen changes with the distance of the object;
When the signal is full, the indicator light flashes and a ticking sound is emitted, meaning that the center of the object has been found.
Calibration the Tool Correctly
Short press the Power Button, the stud finder automatically enters the metal detection function mode. At this time, if there is a signal display on the display screen without interference, it means that calibration is required.
Note: In AC/Metal mode, put it in the air to calibrate it;
In stud/deep mode, put it on the wall where you want to detect to calibrate it
NOTE:
●Sometimes due to various environmental factors, the stud finder may not be able to calibrate automatically, and a wrong alarm signal may appear, please calibrate manually.
●If the detector has just been calibrated on the wooden stand, you need to move the tool out of the range of the wooden stand and detect the wooden stand again.
● If you are receiving erratic scan results, it may be due to moisture, humidity inside the wall cavity or drywall, or recently applied paint or wallpaper that has not fully dried. While moisture may not always be visible, it can interfere with the tool's sensors. Please allow the walls to dry for a few days.
●For some environmental factors or uneven surfaces, it is difficult to detect wooden nails using the wood studs detection mode. It may be easier to find these items by changing the metal detection mode to locate the nails that hold the material to the wood.
● Depending on the proximity of wires or pipes to the wall, the stud finder can detect them in the same way as wood studs. Care should always be taken when nailing, cutting or drilling holes in walls, floors and ceilings that may contain these items.
Product details
| Main Specification | |
|---|---|
| Manufacturer | HANMATEK |
| Unit Count | 1 meter |
| Item dimensions L x W x H | 7.24"L x 3.94"W x 1.89"H |
| Display Type | LCD |
| Brand | HANMATEK |
| Recommended Uses For Product | Metal Detection |
| Power Source | Battery Powered |
| Material | Acrylonitrile Butadiene Styrene |
| Colour | Blue |
| Item Weight | 200 g |
| Product information | |
| search coil size | 10.2 centimeters |
| Technical Details | |
| Manufacturer Part Number | SF1 |
| Material Type | Acrylonitrile Butadiene Styrene |
| International Protection Rating | Ip66 |
| Item details | |
| Model Number | SF1 |
| Others | |
| Product Type | Stud Finders |
Shipping & Delivery
At GofinchKart Australia, we aim to deliver your order quickly and safely.
Domestic Shipping (Australia):
Orders are typically delivered within 3–7 business days.
International Shipping:
Estimated delivery time is 12–26 business days, depending on the destination and customs processing.
Once your order has been dispatched, you will receive a tracking number. Delivery times may vary during public holidays or due to unforeseen delays.