Neodymium Tiny Cylinder Magnets 1mm x 1mm, N52 – 100 Pack
- N52 GRADE STRENGTH – Highest available neodymium grade delivers up to 0.1 lbs pull force in a 1x1mm cylinder, giving you the maximum holding power available at this micro scale
- PRECISION MICRO DIMENSIONS – Each cylinder measures exactly 1x1mm, sized for applications where standard small magnets are still too large: doll joints, paper craft closures, and miniature assemblies
- CRAFT & HOBBY APPLICATIONS – Embed in resin jewelry and resin needle minders, attach cosplay details, anchor scrapbook embellishments, or use in 3D-printed assemblies and sensor prototypes
- 100-PIECE PACK – Includes 100 uniform NiCuNi triple-layer nickel-plated cylinders; consistent dimensions and magnetization direction throughout the pack for reliable results across batch projects
- RARE EARTH PERFORMANCE AT MICRO SCALE – N52 neodymium outperforms ferrite and ceramic magnets by a significant margin at equivalent size; the grade best suited to deliver functional hold in a 1x1mm form factor
-
Save 10% when you buy two or more items.
-
Get 5% off your next purchase.
-
Enjoy free delivery on orders above $200.
-
Orders are processed and shipped from Canberra
3-6 days (Domestic)
Confidence-backed purchases with 30-day return support.
AUD |
BRSROAAEOB6BYHL3 |
Category |
Material Handling Products , Industrial Magnets , Rare Earth Magnets |
Tags |
Estimated shipping
Select a product to estimate shipping.Most small magnets top out at 3mm or 5mm — a size compromise when the mounting cavity, resin layer, or model socket dictates the magnet. These 1×1mm N52 neodymium cylinders are purpose-built for that constraint: micro-scale work where holding power still matters but space does not negotiate.
Why N52 at this size matters
Neodymium magnets lose functional grip fast as dimensions shrink. At 1×1mm, lower-grade rare earth material often falls below the threshold of practical hold. N52 — the highest commercially available neodymium grade — preserves meaningful pull force at this footprint, making the grade choice a functional requirement at micro scale, not a marketing label. The result is up to 0.1 lbs pull force at direct contact: exactly what's needed to hold a needle minder flush in cured resin, snap a removable miniature arm cleanly into its socket, or anchor a scrapbook embellishment without surface bulk.
Built for embedding and flush-mounting
Each cylinder is magnetized axially — through the flat circular face — so both ends attract. Pairs self-align when approaching each other, simplifying embedding into mirrored sockets, opposing resin pours, or printed recesses. The triple-layer nickel-copper-nickel plating produces a smooth, oxidation-resistant surface that seats cleanly in tight channels and does not degrade during storage. Unused pieces stay in condition for future batch work.
Drilling and installation
A standard 1.0mm twist drill — the kind used for PCB work and available for most pin vise sets — cuts a socket with no play and no gap. That diameter translates directly across common modeling materials: styrene sheet, cast resin, MDF, balsa, and PLA/PETG all drill cleanly at 1mm without cracking or fraying. A socket drilled to 1mm depth flush-mounts the cylinder completely with no surface protrusion. For adhesive, thin CA glue wicks into the gap around the cylinder and sets in seconds — the standard method for styrene and most resins. For MDF or wood, medium-viscosity CA or 5-minute epoxy fills a looser channel. In resin casting, no adhesive is needed: place the cylinder before the pour and it encapsulates in place. All 100 pieces ship with consistent pole orientation — one test at the start of a batch confirms the alignment logic for every subsequent piece, with no per-piece checking required.
Wargaming and scale modeling
The same pin vise and 1.0mm drill used for figure pinning works here without additional tooling. Primary applications include swappable weapon arms and shoulder pads : a magnet in the torso socket and a matching magnet in the arm recess allow clean interchange between load-outs. The same method applies to cavalry and monster bases, vehicle hatches, and turret assemblies. For army transport and storage , magnetized figure and figurine bases paired with a steel sheet tray keep armies organized and protected without cutting custom foam inserts — a 100-piece pack is enough for a full magnetizing run on a standard infantry squad, with remainder for bases or additional weapon options. For dioramas and terrain , cylinder pairs serve as hidden attachment points between modular scenic elements: wall sections, removable roof panels, and interchangeable terrain tiles snap together with a flush join and no visible protrusion at the seam.
Application areas
Resin crafts: Cast flush into needle minders, pendants, and jewelry backs — the 1×1mm profile disappears beneath the surface without creating stress cracks in thin pours.
Cosplay and prop-making: Embed pairs in costume seams and prop panel joins for clean, tool-free attachment that survives repeated use, with room for decorative finishing layers over the mount point.
Scrapbooking and handmade bookbinding: Use as flush closures inside album covers, card box lids, and fabric portfolio covers — sits beneath paper or fabric without surface impression.
Sensor and prototype work: Suitable for lightweight positioning and triggering in breadboard-scale assemblies and 3D-printed sensor housings where physical footprint is a hard constraint.
Technical reference
Grade: N52 sintered neodymium | Dimensions: 1x1mm / 1×1mm (1mm diameter × 1mm length)
Magnetization: Axial (through flat circular face) | Plating: NiCuNi triple-layer
Pull force: up to 0.1 lbs at direct steel contact | Max operating temp: 80°C / 176°F
Pack: 100 pieces, consistent dimensions and uniform pole orientation throughout
These magnets are optimized for direct-contact embedded applications — resin, drilled sockets, printed recesses, fabric seams. The up to 0.1 lbs pull force is calibrated for lightweight point-of-contact hold, not for bridging through thick materials or carrying significant load at a gap. At micro scale, the grade is the design decision: N52 is the only path to functional hold in a 1×1mm footprint, and that is precisely what this pack is built around. Handling advisory: Keep away from pacemakers and implanted electronic devices. Not suitable for children under 14. Strong for their size — may pinch fingers when two pieces snap together.
Product details
| Main Specification | |
|---|---|
| Manufacturer | Artec |
| Unit Count | 100 Count |
| Brand | MAGNEZMATIC |
| Number of Items | 100 |
| Shape | Cylindrical |
| Product Dimensions | 0.04"L x 0.04"W x 0.04"Th |
| Item Thickness | 1 millimeters |
| Number of Pieces | 100 |
| Material | Neodymium |
| Colour | silver |
| Technical Details | |
| Part Number | NCM1X1 |
| Material Type | Neodymium |
| Pull Force | 1.6 ounces |
| Item details | |
| Model Number | 1X1MM |
| Item Type Name | Metal |
| Others | |
| Item Highlight | crafts or Rare Earth Round Micro Magnet Cylinders for Miniature Modeling or Needlework or Cosplay & Scrapbooking or Axial |
| Product Type | Metal |
| Item Dimensions L x W x Thickness | 0.04"L x 0.04"W x 0.04"Th |
Shipping & Delivery
At GofinchKart Australia, we aim to deliver your order quickly and safely.
Domestic Shipping (Australia):
Orders are typically delivered within 3–7 business days.
International Shipping:
Estimated delivery time is 12–26 business days, depending on the destination and customs processing.
Once your order has been dispatched, you will receive a tracking number. Delivery times may vary during public holidays or due to unforeseen delays.