ZEKOO 8FT Double Track Bypass Sliding Barn Door Hardware Kit for 2 Doors
- HEAVY DUTY: Bypass barn door hardware kit is made of 1/4" solid carbon steel, prevent deformation and bending, coated with black powder on surface, not easy to rust or scratch, slide quietly and smoothly. Fit for 1-3/8" to 1-3/4" door panel
- WHY CHOOSE US: Double track bypass barn door hardware kit saves more space than traditional double barn door hardware kit, has no overlapping space compared to single track, slides independently, tested over 160,000 times, ensure smooth and quiet sliding
- WIDELY USED: Barn door bypass hardware kit is ideal for bedroom, cloakroom, closet, studyroom, living room, storage room, kitchen, barn, farmhouse and dividers, easy to install, enjoy the fun of DIY, saving the cost of finding carpenters
- PACKAGE INCLUDED: Barn door hardware kit comes with all necessary hardware, including 4x 4FT Rails, 4x Rollers, 6x Bracket Kits, 4x Door Stoppers, 4x Anti-jump Pads, 2 Pair Floor Guides, 6x Spacers and Lag Bolts. SOLD HARDWARE ONLY, DOOR NOT INCLUDED
- PROFESSIONAL TEAM: We have devoted to the development of barn door hardware over 10 years. If there anything missed or if you need other spacer or lag bolts, please let us know, we will help you solve all installation problems in time
-
Save 10% when you buy two or more items.
-
Get 5% off your next purchase.
-
Enjoy free delivery on orders above $200.
-
Orders are processed and shipped from Canberra
3-6 days (Domestic)
Confidence-backed purchases with 30-day return support.
AUD |
BRSWGFITB56A2C3A |
Category |
Hardware , Door Hardware & Locks , Sliding Door Hardware |
Tags |
Estimated shipping
Select a product to estimate shipping.ZEKOO has devoted to the development of barn door hardware over 10 years, improve and upgrade products to give each family the most appropriate choice
ZEKOO 8ft double track bypass sliding barn door hardware kit use for double doors (doors not include)
Q: How to choose barn door track size?
A: Barn door track length should be at least of total door width. For example, if you each barn doors is 48'' wide, you will need 2*48'' = 96'' (8FT) long track, your opening will show a half, you can use the track which is a little bit longer and please let your door a little bigger than the opening.
Q: Can the bypass barn door system let the opening show fully?
A: Yes, you can select a longer track, if each door is 48'' wide, you can choose 12ft track kit
Q: How much ceiling space requirement of the double track bypass system?
A: At least 9" from top of door to ceiling to install.
Q: How much gap of the double track bypass system?
A: This is double track bypass barn door kit, the gap between inner door&wall is about 5/8'' , the gap between two door panels is about 2'' based on door thickness 1-9/16''
Q: How far does the outer door extend from the wall?
A: It is about 6''
The barn door hanger roller with Professional bearings, make your bypass barn door hardware service life last longer
About the bearing
Material quality is high purity bearing steel Gcr15, professional bearing materials, ring fixed structure bearing, wraps around the steel ball and prevent steel ball from leaving the locus, make sliding more stable.
There is a dust cover the bearing to prevent dust from entering and lubricating oil leakage, let the roller can slide smoothly and more durable.
1 hanger with 2 life time lubricated bearing, ensure sliding balance and stability, test beyond 160,000, you can use it for a long time.
About the hanger
The roller surface is covered with nylon, wear-resisting and slide very quietly.
We design the Dowel pin Front part slightly larger, keep the dowel stuck in hole not fall off.
All of prat is make by Q235 carbon steel, thick is 1/4'' (6.3mm)
8.8 grade roller bolt can hold the doors comfortably
About all 8 FT Double track bypass hardware
Track : 4 pieces 4ft rails, Pre-drilled 16" apart holes on track, make by solid 1/4" thick steel, with 8.8 grade high strengh bearing capacity lag blots, fit for concrete wall and wooden wall
Track connector : With 4 screws to fastening the track, make the installation more convenient and beautiful
Bracket : low ceiling bracket consists of two parts, split design is equal to 2-layer bearing capacity,bring more stable and load-bearing capacity with with 8.8 grade screws
Track spacer : Provide 1-3/8'' length spacer, fit for door thickness less than 1-3/4", if your door thickness less than 2-1/6 ", we also have 1-3/4'' spacer for you to choose from, If your door thickness is greater than 2-1/6 ‘’, you can add a headboard on wall, then install the track and bracket
Door stopper : Prevent the door falling off from the track, one door have 2 stoppers, ensure the stability and safety, with the rubber plug, good damping effect and reduce the noise, have 2 screws to fasten stopper on track, you can put stopper on track where you want to stop your door, easy to remove if you want adjust
Floor guide : can prevent the door swinging back and forth or against the baseboard, let your door slide on same locus, fit for all thickness with grooved or ungrooved doors
Anti-jumper: can prevent door to be lifted off rail when the barn door slide, ensure the stability and safety
Double track barn door bypass instructions step by step with fractional measurements in inch, have detailed word instructions with pictures
Q: Can i cut the track?
A: Yes, you can cut it into any length of you want
Q: Can i use it for out door ?
A: We suggest if use for outdoors, you can make some cover above the track, and you need paint and add oil regularly to extended service life
Q: What accessories is required if I want to install more doors?
A: You can buy an extra set of hangers, you can search the product number (B01KH3OH4E) on .
Q: What circumstances do I need to add a headboard?
A: 1. If you have a doorway trim or your door thickness greater than 2-1/6 ‘’; 2 . If the studs don't line up with the pre-drilled holes in the rail
Q: How thick door use for it? What is the weight capacity?
A; We suggest 1-3/8" ~ 1-3/4" thick door, if you use for other thick door, please tell us, we will provide some accessories to you; Each track limited 230lbs.
Double track barn door bypass hardware kit package include
4 x 4FT Rail
2 x Track Junction Plate
4 x Steel Hanger with bolt
4 x Door Stopper with Hex Wrench
12 x 1-3/8'' Spacer with lag bolt
6 x Set of Brackets with lag bolt
2 x Floor Guide with screw
4 x Anti-Jumper with screw
1 x Double Track Bypass Barn Door Hardware Installation Manual
Why choice double track bypass system?
When your wall width did not enough, the bypass system is only need same width with your opening
Complements your locker room, closet, kitchen, wardrobe, bathroom, bedroom, storeroom
We have large processing factory and advanced equipment, accept mass customization
You also can install like this
The bracket is split design, you can install like U shape or install L shape, easy change the style
If install like L shape, it need 12'' ceiling space from top of door to ceiling.
Product details
| Main Specification | |
|---|---|
| Manufacturer | Zekoo |
| Unit Count | 8 Feet |
| Brand | Zekoo |
| Number of Items | 1 |
| Material | Carbon Steel |
| Colour | J Shape Bypass |
| Style | Rustic |
| Technical Details | |
| Manufacturer Part Number | USGCM2779 |
| Material Type | Carbon Steel |
| Item details | |
| Model Number | SG-8 |
| Style | |
| Style Name | Rustic |
| Others | |
| Item Highlight | Low Ceiling Space Saving - Heavy-Duty Barn Door Track Kit with Quiet Rollers - Easy Install for Closet or Fit 2x48" Doors |
| Product Type | Sliding Door Hardware |
Shipping & Delivery
At GofinchKart Australia, we aim to deliver your order quickly and safely.
Domestic Shipping (Australia):
Orders are typically delivered within 3–7 business days.
International Shipping:
Estimated delivery time is 12–26 business days, depending on the destination and customs processing.
Once your order has been dispatched, you will receive a tracking number. Delivery times may vary during public holidays or due to unforeseen delays.