21Pcs Indexable Lathe Turning Tool Kit,3/8" 10mm Shank and Carbide Inserts
- Seven Holders, Four Machining Jobs — External turning, chamfering, grooving and parting, 60° threading on both the outside and the inside, plus boring are covered by seven indexable holders: SCLCR1010H06, SDJCR1010H07, SDNCN1010H07, SER1010H11, SNR0010K11, MGEHR1010-2, and S10K-SCLCR06.
- Sized for Small and Bench Lathes — A 10mm square shank is the practical middle ground between 8mm micro tooling and heavier 12mm bars. It suits 7x10 to 8x14 bench lathes and metric quick-change tool posts, and keeps cutting forces light for hobby-scale workpieces.
- External and Internal Threading in One Box — A matched 60° pair handles both sides of threading jobs: SER for external threads, SNR for internal threads. Internal threading bars are the piece most kits at this price leave out, so repair and one-off work stays in-house.
- 10mm Shank for Metric Tool Posts — The 10mm (0.394") square shank is built for 10mm tool posts and metric quick-change holders, including most QC posts with interchangeable shims. It is not a drop-in for a standard 3/8" (0.375") English opening, so verify your post size before ordering. Boring bars additionally need a workpiece bore large enough for bar plus insert.
- Fourteen CVD-Coated Inserts = Two per Holder — Worn edge becomes a quick index or swap instead of a reorder, and a matching wrench ships with every holder so the swap needs no extra tools. The CVD-applied titanium-nitride (TiN) coating adds a wear-resistant layer over the carbide body. Positive-rake geometry targets the metals a home shop actually cuts — 6061 aluminum, 360 brass, 12L14, and low-ca
-
Save 10% when you buy two or more items.
-
Get 5% off your next purchase.
-
Enjoy free delivery on orders above $200.
-
Orders are processed and shipped from Canberra
3-6 days (Domestic)
Confidence-backed purchases with 30-day return support.
AUD |
BRSRAHA6O4DWEYI4 |
Category |
Cutting Tools , Indexable Insert Holders , Turning Holders |
Tags |
Estimated shipping
Select a product to estimate shipping.Every Job a Small Lathe Faces Seven indexable holders and fourteen CVD-coated carbide inserts turn one box into a full tool rack: turning and chamfering with SCLCR/SDJCR/SDNCN, grooving and parting with MGEHR, external 60° threads with SER, internal threads with SNR, and boring with the S10K-SCLCR06 bar. Each holder uses standard ISO insert styles, so replacement inserts stay easy to source.
Matched for Home-Workshop Metals The insert geometry favors the three metals most hobby machining touches: 6061 aluminum, 360 brass, and 12L14 free-cutting steel, with low-carbon steel handled comfortably at moderate speeds. Positive rake keeps the cut free and the finish smooth on light bench lathes. 304/316 stainless is possible only with conservative speeds, feeds, and depth of cut. The working window covers metals up to 40 HRC (Rockwell C) — aluminum, brass, free-cutting and low-carbon steels, plus many annealed or pre-hardened alloy steels on light passes. Hardened tool steel, titanium, and nickel-based alloys sit above 40 HRC and are outside this kit's design range.
Honest Steel: AISI 1045 Bodies Each of the seven holder bodies is machined from AISI 1045 medium carbon steel (45#), quenched and tempered for strength and toughness, then finished with black oxide to resist shop rust. The body never does the cutting itself — its job is to hold the carbide insert rigidly and on center — so a properly hardened 1045 body delivers the stiffness this kit needs without exotic-material claims. The CVD-coated carbide inserts carry the cutting edge; the steel shank carries the load.
A Threading Pair That Covers Both Sides External threading needs a right-hand 60° holder; internal threading needs its own bar and a workpiece bore that clears it. This kit includes both — SER for outside threads and SNR for inside threads — which is the combination most entry kits omit.
The 10mm Shank Question, The shank is metric 10mm square (0.394"). It fits metric 10mm tool posts and metric quick-change holders, and most QC posts with interchangeable shims. A standard 3/8" English tool post opening is 0.375" — smaller than the shank — so measure your post before ordering. When in doubt, this listing's holders work best where a 10mm or 3/8"-nominal metric seat is available.
What's in the Box Seven indexable holders (SCLCR1010H06, SDJCR1010H07, SDNCN1010H07, SER1010H11, SNR0010K11, MGEHR1010-2, S10K-SCLCR06), fourteen CVD-coated carbide inserts, and a matching wrench for every holder. Inserts ship loose and mount in seconds with the included wrench.
| Main Specification | |
|---|---|
| Manufacturer | YoShin |
| Brand | YoShin |
| Item Weight | 1.79 pounds |
| Product information | |
| Package Dimensions | 11.85 x 6.34 x 1.85 inches |
| Others | |
| Date First Available | 2024 or November 23 |
| Product Type | Turning Holders |
Shipping & Delivery
At GofinchKart Australia, we aim to deliver your order quickly and safely.
Domestic Shipping (Australia):
Orders are typically delivered within 3–7 business days.
International Shipping:
Estimated delivery time is 12–26 business days, depending on the destination and customs processing.
Once your order has been dispatched, you will receive a tracking number. Delivery times may vary during public holidays or due to unforeseen delays.